:: Welcome to Leupy's Custom Shop ::
Galleries > ... > sleeved adapters > 107 Images
To the overview
sleeved adapters

Sleeve and Frame Adapters

I provide these as an alternative to barrel threading which generally requires a minimum diameter of 15mm to give sufficient shoulder for adequate moderator base support. These adapters are precision bored to provide a nice sliding fit on the muzzle and are attached by grubscrew or Loctite. The latter, which allows a thinner wall design is semi-permanent and can be removed with a little heat.

Another type of adapter is shown in the miscellaneous section.

The selection below shows examples in brass, stainless steel, and polished mild steel before and after chemical blacking.

They all have a 1/2" X 20UNF male thread, for attachment of sound moderator. Some are shown with optional custom thread protector ring which I make in various styles to your specified design, with or without knurling or banding etc.

Please note I require an accurate barrel diameter and the calibre to be specified when ordering.

Gallery last updated 12th February 2012


Aluminium Stealth UNF frame adapter (flush type) and large Delrin TPR
Aluminium UNF adapter for Stealth frame, end view
Aluminium UNF adapter for Stealth frame with TPR
Aluminium UNF adapter for Stealth frame
Aluminium UNF frame adapter for Stealth, knurled and jewelled with thread protector ring removed
Aluminium UNF frame adapter for Stealth, with knurling and mixed jewelling
Banded knurled adapter showing grub screw attachment
Brass adapter for solenoid operated Stealth air valve
Brass and steel barrel adapters for grub screw attachment, end view
Brass and steel barrel adapters for grub screw attachment
Brass UNF frame adapter for Stealth, end view
Brass UNF frame adapter for Stealth 2
Brass UNF frame adapter for Stealth
Chemically matte blacked adapter with knurling TPR removed, end view
Chemically matte blacked adapter with knurling TPR removed
Chemically matte blacked adapter with knurling
Chinese AR10 Bullpup (QB57) adapter in oil blued steel, with Gramps behind the trigger
Chinese AR10 Bullpup (QB57) adapter in oil blued steel
Heavy wall brass adapter showing grub screws
Mild Steel Falcon adapter
Mild Steel Falcon adapter2
Plain barrel adapter with grooving before blacking
Plain barrel adapter with grooving chemically blacked
Plain steel barrel adapter chemically blacked and oiled

< 12345 >
Tip: On the small navigation in the left upper corner you can directly jump to all the parent levels.
Visits: Total:3.357.673 Today:389Photo Gallery powered by TinyWebGallery 2.5powered by TinyWebGallery 2.5
© Drum 2005, all rights reserved
:: back to top ::