:: Welcome to Leupy's Custom Shop ::
Galleries > ... > sleeved adapters > 107 Images
To the overview
de
en
es
en
sleeved adapters

Sleeve and Frame Adapters

I provide these as an alternative to barrel threading which generally requires a minimum diameter of 15mm to give sufficient shoulder for adequate moderator base support. These adapters are precision bored to provide a nice sliding fit on the muzzle and are attached by grubscrew or Loctite. The latter, which allows a thinner wall design is semi-permanent and can be removed with a little heat.

Another type of adapter is shown in the miscellaneous section.

The selection below shows examples in brass, stainless steel, and polished mild steel before and after chemical blacking.

They all have a 1/2" X 20UNF male thread, for attachment of sound moderator. Some are shown with optional custom thread protector ring which I make in various styles to your specified design, with or without knurling or banding etc.

Please note I require an accurate barrel diameter and the calibre to be specified when ordering.

Gallery last updated 12th February 2012


Plain steel barrel adapter
Ratty adapter A2
Ratty adapter B
Ratty adapter B2
Ratty
Sharp Innova end assembly, modified with oil blued UNF adapter, TPR and end cap
Sharp Innova end assembly, modified with oil blued UNF adapter in place and TPR
Sharp Innova end assembly, modified with oil blued UNF adapterand TPR in place
SKAN M32 adapter stages
SKAN M32 with new chemically blacked UNF adapter and HW moderator fitted
SKAN M32 with new chemically blacked UNF adapter and TPR fitted
SKAN M32 with new UNF adapter (before blacking) and TPR fitted
SKAN M32 with new UNF adapter and TPR fitted, before and after chemical blacking
SKAN M32 with original end cap and new UNF adapter (before blacking)
SKAN UNF adapter, chemically blacked
SKAN UNF adapter and end cone for extended barrel
SKAN UNF moderator adapter and original end cap, end view
SKAN UNF moderator adapter and original end cap 2
SKAN UNF moderator adapter and original end cap
SKAN UNF moderator adapter
Stainless Steel adapter for AA410
Stainless steel adapter for STEYR, with Jim Edge moderator
Stainless steel adapter for STEYR end view showing precision boring
Stainless steel adapter for STEYR with plain style TPR

< 12345 >
Tip: On the small navigation in the left upper corner you can directly jump to all the parent levels.
Visits: Total:399280 Today:67Photo Gallery powered by TinyWebGallery 1.7.6
© Drum 2005, all rights reserved
:: back to top ::