:: Welcome to Leupy's Custom Shop ::
Galleries > ... > sleeved adapters > 107 Images
To the overview
sleeved adapters

Sleeve and Frame Adapters

I provide these as an alternative to barrel threading which generally requires a minimum diameter of 15mm to give sufficient shoulder for adequate moderator base support. These adapters are precision bored to provide a nice sliding fit on the muzzle and are attached by grubscrew or Loctite. The latter, which allows a thinner wall design is semi-permanent and can be removed with a little heat.

Another type of adapter is shown in the miscellaneous section.

The selection below shows examples in brass, stainless steel, and polished mild steel before and after chemical blacking.

They all have a 1/2" X 20UNF male thread, for attachment of sound moderator. Some are shown with optional custom thread protector ring which I make in various styles to your specified design, with or without knurling or banding etc.

Please note I require an accurate barrel diameter and the calibre to be specified when ordering.

Gallery last updated 12th February 2012


Webley Alecto barrel extension adapter
Webley Alecto with Hatsan moderator attached. Picture courtesy D Leonard
Webley Blackhawk, foresight removed and fitted with sleeved adapter
Webley Blackhawk, foresight removed and prepared for sleeved adapter
Webley Blackhawk, foresight removed and sleeved adapter fitted, before oil blueing
Webley Blackhawk blued sleeved adapter and muzzle brake (not mine) fiitted
Webley Blackhawk blued sleeved adapter and TPR fitted closeup
Webley Blackhawk blued sleeved adapter and TPR fitted
Webley Blackhawk sleeved adapter after blueing with TPR removed
Webley Blackhawk sleeved adapter with TPR after blueing
Webley Blackhawk with foresight removed and Leupy sleeved UNF adapter fitted
 
      
      

< 1345 >
Tip: Press l for login
Visits: Total:3.373.620 Today:784Photo Gallery powered by TinyWebGallery 2.5powered by TinyWebGallery 2.5
30 days history
© Drum 2005, all rights reserved
:: back to top ::